SKU: RC0200-D

UPC: 898366002543

Redithotics - Redi-thotics - Heat Moldable - Arch Supports at Orthotic Shop. Redi-Thotics Quik-Form Insoles perfectly shape to the arch of your foot with heat moldable technology.

Heating Instructions:

1. Preheat oven to 250 degrees.
2. Remove insoles from package and place blue side up in oven for 2 minutes.
3. Remove insoles from oven and place in your shoes.
4. Stand in your shoes with toes pointed forward and shoulder width apart for 2 minutes.

Redithotic Redi-Comfort Heat Moldable Arch Supports


The Redi-Thotic heat moldable arch support is moldable to provide person specific arch support. The Redi-Comfort heat moldable support uses a firm EVA shell so the orthotics can be modified. The orthotics are contoured to better fit moderate to high arches.

Feet are extremely complex; they affect overall body health and comfort. Research shows that 8 in 10 people have foot problems.

See the Redi-Thotics Benefit Guide to pick the right Redithotic arch support for you.



Features & Benefits of the Redi-Comfort, Heat Moldable Arch Support

• Moldable to provide person specific arch support
• Redistributes shock forces to reduce foot trauma
• Reduces metatarsal and transverse arch bruising
• Provides extra arch support to help stabilize your feet and prevent strain & injury.
• The moldable shell supports & stabilizes the arch area, holds the foot in natural alignment, and prevents falling arches.
• Integrated Heel Cup uses a Supreva HD material to catch the shock forces created with each step you take and redistributes them evenly to reduce trauma.
• Helps protect against heel strike, low back pain & fatigue
• Barretex top cover that breathes circulating air throughout the shoe to ventilate the foot with each step.
  

Size	A	B	C	D	E	F	G	H
Women	6-7.5	8-8.5	9-9.5	10-10.5	11-11.5	12+
Men	5-6.5	7-7.5	8-8.5	9-9.5	10-10.5	11-13	13.5-15	15.5-17
European	35/36	37/38	39/40	41/42	43/44	45/47	48/50	52/54




Heat Moldable Molding Instructions

1. Remove orthotics from package.  Place in convection oven face up.  Heat for 3 minutes at 250 degrees.(Allow an extra 30 seconds if using a non-convection oven).
2. Orthotics will be warm to touch. 
   
3. Place on a foam block or soft base and have patient stand on orthotics. 
   
1. If arch is too high patients weight will lower arch while it is still warm.
2. If you need to raise arch place your thumb under the medial lateral arch and press up until the orthotic arch meets the human arch and hold for 60 seconds.
4. The forefoot will mold via patients natural gate and everyday wear.